background image

23

YEAR

WARRANTY

To obtain service: 

 

     we’ve got your back

2

PARTS + LABOR

Call 973-403-8900 |email service@xoappliance.com | or submit a request on our website

www.xoappliance.com

           XOIL30MANUAL2020

90 DAY LOVE IT or LEAVE IT.  

For 90 Days all our products are backed by our unique Love it or Leave it Guarantee.

TWO-YEAR PARTS & LABOR LIMITED WARRANTY.

 XO warrants to the original purchaser of every new XO ventilation unit, the 

cabinet and all parts thereof, to be free from defects in material or workmanship under normal and proper use and maintenance as 

specified by XO and upon proper installation and start-up in accordance with the instruction packet supplied with each XO unit. XO’s 

obligation under this warranty is limited to a period of two (2) years from the date of original purchase.  

WARRANTY CLAIMS. 

All claims for labor or parts must be made directly through XO. All claims should include: model number and 

serial number of cabinet, proof of purchase, and date of installation. In case of warranted compressor, the compressor model tag must 

be returned to XO along with the above listed information.

WHAT IS NOT COVERED BY THIS WARRANTY.

 XO’s sole obligation under this warranty is limited to either repair or replacement of 

parts, subject to the additional limitations below. This warranty neither assumes nor authorizes any person to assume obligations other 

than those expressly covered by this warranty.  Open box, factory seconds, scratch and dent, floor models and commercial applications 

are excluded from these warranties.  

WARRANTY IS NOT TRANSFERABLE.

 This warranty is not assignable and applies only in favor of the original purchaser/user at the

original installation location. Any such assignment or transfer shall void the warranties herein made and shall void all warranties, 

express or implied, including any warranty or merchantability or fitness for a particular purpose.

IMPROPER USAGE.

 XO assumes no liability for parts or labor coverage for component failure or other damages resulting from

improper usage or installation or failure to clean and/or maintain product as set forth in the warranty packet provided with the unit.

ALTERATION OR NEGLECT.

 XO is not responsible for the repair or replacement of any parts that XO determines have been

subjected after the date of manufacture to alteration, neglect, abuse, misuse, accident, damage during transit or installation, fire, flood,

or act of God.

IMPROPER ELECTRICAL CONNECTIONS.

 XO is not responsible for the repair or replacement of failed or damaged components

resulting from electrical power failure, high or low voltage, use of extension cords, or improper grounding of the unit. 

YOUR RIGHTS UNDER STATE LAW. 

This warranty gives you specific legal rights and you may have other rights that vary from state to 

state. Some states do not allow the exclusion or limitation of consequential damages or a limitation on how long an implied warranty lasts, 

so the above exclusion or limitation may not apply to you.

OUTSIDE U.S. 

This warranty does not apply to, and XO is not responsible for, any warranty claims made on products sold or used outside 

the 48 continental United States.

Summary of Contents for XOIL4819KS

























Reviews: