- 19 -
off the 4 hour timer will reset.
- To disable Clean Air Function:
With hood off, hold Power Button down for five seconds until Clean Air Indicator light turns off.
Note1:
Changing the fan speed and interrupting the Clean Air Function while it is operating
does not disable the Clean Air Function. Clean Air Function will only be disabled by holding
the Power Button for 5 seconds.
Note2:
Turning lights on/off does not disable the Clean Air Function.
clean air function enabled with low fan speed turned on by clean air function
F
an
s
peed
indicator
(8)
= Low
= Medium
= High
- On speed low, only number 1 indicator will be on.
- On speed medium, 1 and 2 indicator will be on.
- On speed high, 1, 2 and 3 indicators will be on.
- When fan off, no fan speed indicator will be on.
reMote control (
optional
)
Remote control (purchase separately) can be used to operate the hood.
• Synchronization:
The remote control must be synchronized with the hood before using:
To synchronize the remote control with the hood, proceed as follows:
1. Turn the power off and back on at the circuit breaker.
2. When number 5 indicator of the hood lights blinks, press any key of the remote control.
The remote control is now synchronized.
3. If synchronization failed, repeat the procedure.
