XOCECO PS-32HU35, Service Manual

5 

normal, if not, enter COLOR TEMP menu, set ALL COLOR to 0 and fine adjust according the 
method of 3.3.1 c) 

b. connect VG-848 signal of YPBPR to YPBPR terminal and input TIMING972(1080i/60HZ) 

100% color bar of PAT976(include black/white bar), Enter submenu of ADC ADJ, Select 
AUTOTUNE and wait for OK display. Input PAT920(8 gray levels), check if the white balance is 
normal, if not, set ALL COLOR to 0 and fine adjust according the method of 3.3.1 c) 

c. Input AV signal(PM5518, 8 gray levels, PAL for Chinese and NTSC for America) to VIDEO 1 

terminal, check if the white balance is normal, if not, set ALL COLOR to 0 and fine adjust according 
the method of 3.3.1 c)     

Note

: it can’t set back to 1 once ALL COLOR changes to 0. 

4 Performance check 

4.1 TV function 
Enter searching menu 

→

 auto search, connect RF-TV terminal with central signal source and check 

if the picture is normal, if there are channels be skipped. Check CCD function.   
4.2 AV/S, YPbPr terminals   
Input AV/S, YPbPr/YCbCr HD signal, check if it is normal. 
4.3 VGA terminal 
Insert VGA terminal, input VGA format signal of 1024X768@60 Hz and check if the display is 
normal.  
4.4 HDMI terminal 
Insert HDMI terminal, input signal of 1024 X 768@60 Hz signal and check if the display is normal 
and the HDCP is normal. 
4.5 check sound channel 
Check the speaker and headphone of each channel. 
4.6 other function check 
Check the turn on/turn off timer, asleep timer, picture/sound mode, OSD, freeze/mute, stereo, magic 
picture, ect. 
4.7 presetting before ex-factory 

Item Setting  Item 

Setting 

Item  Setting 

PICTURE MODE 

NAUTRAL 

AUDIO MODE 

DK 

OSD language 

English / 

Chinese  

SOUND MODE 

NEWS 

HALFTONE 

50 

VGA/HDMI  

color temperature 

STANDARD 

NR WEAK 

DURATION 

15 

ANTENNA 

CATV 

ZOOM FULL