28
XM-DTSBN929
XOMAX
EN
Thema:
Set the GPS-Path
Calibration
If the touchscreen appears to operate
not properly perhaps you have to re-ca-
librate it. Choose the calibration mode
and then tip the arrow key.
Procedure:
As soon as the calibration starts on the
screen appear 5 crosses. You have to
tip the very middle of each following the
numeration: 1, 2, 3, 4, 5.
In ideal case use the specially designed
stylus.
As soon as you tipped each of the
crosses the touchscreen is calibrated.
Please note: you have to TIP only the
CROSSES, do not fondle through the
touchscreen.
Language setting
Touch
Language
icon can
enter Language setting interface, set the
language needed.
Brightness
Left and right sliding icon can adjust
screen's brightness.
Set the GPS-Path
You have to set he correct path to the
executive file of the navigation software
on the SD memory card so the unit's
processor could find it and start the
programm properly.
Please tip the
NAVI
key on the front
control panel. Now tip the correspon-
ding folder in the file manager and then
confirm your selection tipping the
key on the screen. Perhaps you
will have to scroll the file list to find the
