background image

19

XOMAX

EN

Topic: 

Recycling of an old unit

https://www.xomax.de

Recycling of an old unit

 

User information regarding recycling of 
electric and electronic devices (private 
households) 

This symbol on products or in their 
manuals implies that electric and 
electronic devices at the end of their 
service life should be separated from 
the domestic waist.

 

Please hand these products for recy

-

cling at municipal collection points free 
of charge.

 

The proper disposal of these products 
contributes to environment protection. 
To find the nearest collection point 
or recycling yard please consult your 
municipal administration.

Recycling of the battery

 

According to the battery decree we 
make you aware of your obligation to 
dispose of empty batteries at municipal 
collection points.

 

 

Batteries that contain pollutants 
(e.g. Hg = mercury, Pb = lead, Cd = 
cadmium) are labelled with the symbol 
pictured above.

 

 

At our place you can free dispose of the 
empty batteries purchased at our store.

Made for STEL Multimedia GmbH

 

Paewesiner Weg 20

 

13581 Berlin

 

GERMANY

WEEE: DE19856609

Summary of Contents for XM-RD269





















Reviews: