background image

15

EN

Topic: 

ISO plug configuration

2   1    2   1
4   3    4   3
6   5    6   5
8   7    8   7

A

B

Socket A (power supply)

On the A side you can find the socket 
for power supply.

A1 – spare

 

A2 – spare

 

A3 – spare

 

A4 - (+12Volt) steady plus * (yellow)

 

A5 – (+) electric antenna (blue)

 

A6 – spare

 

A7 - (+12Volt) ignition plus *(red)

 

A8 – (-) minus / ground (black)

* - Some vehicle manufacturers use 
their own pin assignment. Especially 
the terminals A7 (ignition plus) and A4 
(steady plus) are often interchanged. 

The incorrect connection in this case 

leads to following problem: the unit 
can not be turned on if the ignition is 
off and all the saved settings are lost 
as soon as the unit will be turned off. If 
these problems appear the connections 
A4 and A7 should be interchanged.

Socket B (loud speakers)

On the B side you can find the speakers 
terminals.

B1 – (+) rear right (violet)

 

B2 – (-) rear right (violet/black)

 

B3 – (+) front right (gray)

 

B4 – (-) front right (gray/black)

 

B5 – (+) front left (white)

 

B6 – (-) front left (white/black)

 

B7 – (+) rear left (green)

 

B8 – (-) rear left (green/black)

The terminals are coloured by pairs, in 
each case one (+) and one (-).

       

Though the design of ISO plug is 

standardized, it's pin assigment is not 
and may vary. Thus in case of mis

-

match of connections due to different 
pin assignments a simple plug'n'play 
connection may lead to grievous errors.

!

ISO plug configuration

Summary of Contents for XM-VRSUN729




















Reviews: