GW0017 User Manual
55
4.11
Call & Routing
4.11.1
Port Group
When two or more FXS ports need to register with a same SIP account, you can group the
ports together and then set an account for the group on the
Call & Routing
→
Port Group
page.
Parameters of port group include registration, primary display name, primary SIP user id,
primary authentication ID and password, secondary display name, secondary SIP user id,
secondary authentication ID and password, off-hook auto dial, auto dial delay time, port select,
etc.
Figure 4-18 Add Port Group
Table 4-12 Parameter Explanation of Port Group
Index
The NO. of the port group; It uniquely identifies a route.
Description
The description of the port group; it is used to identify the port group.
Display Name
Display name of the port group, which will be used in SIP message, for
example:
