PM1615 UC42 User Manual_English_Global Rev.01 32
3. Enter the Label displayed on LCD.
4. Click the
to save the configuration.
Upgrade
Xorcom UC42 Expansion Module upgrades in an indirect mode, first, the IP Phone that
connects with expansion module upgrades the expansion module FW, then the expansion
module upgrades via getting fw46M.rom file from the phone. For detailed schedule,
please see below instruction.
IP Phone upgrades the expansion module FW
Before upgrade the expansion module, please make sure your IP Phone could upgrade
the expansion module FW (we suggest your IP Phone’s FW version running later
1.0.3.98
FW
). The instructions for upgrade the expansion module FW on your phone are as
follows:
(1)
First enable “
Upgrade EXP Firmware
” option from Management->Auto provision->
Upgrade EXP Firmware
⚫
If set this option to Yes, the IP Phone will get fw46M.rom file after rebooting IP
Phone.
⚫
If set this option to No, the IP Phone will not get fw46M.rom file.
(2) Put the fw46M.rom into the upgrade server path. You can upgrade by
TFTP/HTTP/HTTPS/FTP.
(3) Set the server path at Webpage-Management-Auto Provision-Firmware Server Path.
(4) After you upgrade by TFTP/HTTP/HTTPS/FTP, please login Webpage->Home->
Expansion Module version to check whether the expansion module FW has been
Upgrade successfully. See below picture:
