ENG 8
purchase.
Tip: The default password is 0000. If you have forgotten your password, please
contact your local product distributor.
3.1 Powering On
1. Connect the power cord of the product to a wall outlet.
2. Ensure the
ON/OFF
switch at the rear of the product is switched to
ON
.
3. Power on by pressing the
STANDBY
button on the remote control or the
STANDBY
button at the front of the product.
3.2 Antenna Settings
Antenna Settings
allows you to configure the antenna setting parameters.
Menu->INTALLATION->Antenna
Settings
1.
Satellite
:
Highlight the satellite you
want to search.
2.
Transponder (TP for short)
: Press
the
VOL+/VOL-
button to change the
TP.
3.
LNB Type
:
Press the
VOL+/VOL-
button to change the LNB frequency.
4.
LNB Power:
Press the
VOL+/VOL-
button to select the required LNB power.
5.
22KHz
:
Press the
VOL+/VOL-
button to select
ON, OFF
or
Auto
.
6.
DiSEqC 1.0
:
Press the
VOL+/VOL-
button to select the required DiSEqC1.0 input.
7.
DiSEqC 1.1
:
Press the
VOL+/VOL-
button to select the required DiSEqC1.1
input.
8.
Motor
:
Press the
VOL+/VOL-
button to select DiSEqC1.2 or USALS.
9.
Scan Mode
: Press the
VOL+/VOL-
button to select scan mode.
10.
Start search
: Press the
VOL+/VOL-
button to select Satellite, Multi-Sat, Blind
Summary of Contents for HR5 8590
Page 1: ...Bedienungsanleitung User s Manual HRS 8590 LAN...
Page 2: ......
Page 39: ...User s Manual HRS 8590 LAN...
Page 62: ......