EN-10
E
n
g
lis
h
Installation
You should install the receiver when powering on your product for the first time after pur-
chase.
Tip: The default password is 0000. If you have forgotten your password, please contact
your local product distributor.
Powering On
1. Connect the power cord of the product to a wall outlet.
2. Power on by pressing the POWER button on the remote control or the POWER button
at the front of the product.
Initial setting
When you first use, you need to select the OSD language, Tuning Type, Country
Region,
You can see some options in Satellite menu There are Satellite, LNB frequency, 22KHz,
and Search.
Satellite
Select the satellite whose settings you want to change.
LNB frequency
Here you define the LNB type. Use the setting Universal (9760-10600). Only experi-
enced users should change this value!
22KHz
By connecting a 22KHz signal, the receiver can switch the LNB to receive another
frequency band. This setting must be changed only in very rare cases. A wrong set-
ting causes the transmitter to be missing or no reception is possible at all.
Search Press BLUE button to start search.
Auto Search
Auto Search allows you to configure the cable setting parameters.
Menu->Channel->Auto
Tuning
Before search, you can select the country, and then you must select the correct network
option which you want to search. And then move highlight to Search, and press OK button
to search.
