EN-4
E
n
g
lis
h
Safety Precaution
This STB has been designed and manufactured to satisfy the international safety stan-
dards. Please read the following safety precautions carefully before operating this re-
ceiver.
Main Supply:
Before operating, please check the units operating voltage is 230V AC 50/60Hz.
Overload:
Do not overload a wall outlet, extension cord or adapter, neither use damaged power cord
or touch it with wet hand as this may result in electric shock.
Liquid:
The receiver shall not be exposed to dripping or splashing water, and that no objects filled
with liquids, such as base, shall be placed on the apparatus.
Ventilation:
Keep the slots on top of the receiver uncover to allow sufficient airflow to the unit. Do not
put the receiver on soft furnishings or carpets. Do not expose the receiver to direct light or
do not place it near a heater or in humid conditions. Do not stack other electronic equip-
ments on top of the receiver.
Cleaning:
Plug out the receiver from the wall outlet before cleaning. Clean the receiver by a soft
cloth or mild solution of washing-up liquid (no solvents).
Connection:
Disconnect the receiver from the mains when you connect or disconnect it to Cable.
Location:
Put the receiver indoor in order to avoid lightening, raining or sunlight.
Uncover:
Do not remove the cover, to reduce the risk of electric shock. Contact qualified and li-
censed service personnel to repair the receiver, or contact your dealer.
