HRT 7522 SET
Package Content
•
XORO HRT 7522 (incl. Remote Control Unit and User Manual)
•
HDMI-Cable (1,5m)
•
Antenna (2-3dBi, UHF 470-862MHz)
•
Stand for Antenna (magnetic)
•
Amplifier (20dB, Voltage Supply: 5V/20mA max.)
Note: Please follow the instructions in the user manual for HRT 7522 first!
Antenna
Antenna and Stand may be shipped as separate pieces. They must be screwed together.
The Antenna Stand is magnetic. Keep the magnetic bottom side away from hard disc
drives, floppy discs, credit cards and other objects that can be damaged by magnetic fields.
The Antenna is now ready to use and can be connected to the Receiver directly (RF-IN).
You can improve the signal quality if you connect the included
amplifier. The required supply voltage for the amplifier comes
from the Receiver. Please set
Antenna Power
to
on
. The
Amplifier-LED lights when the supply voltage is enabled. If
you connect the Amplifier without enabling the supply voltage,
the signal quality will decrease. Please read the manual of
HRT 7522 for details.
If the channels are missing after channel scan, place the antenna in a different location. In
some areas an outdoor antenna may be required.
Antenna
Stand
Amplifier
LED
English
