background image

 

18 

HTL 400T

 

 

English 

Settings 

Display Setting 

Contrast 

With this option you can change the contrast setting of the screen. Press the 

/

 

buttons to change the contrast. Change the setting if you want and confirm the new 
setting with the 

OK

 button. 

 
Hue 

With this option you can change the hue setting of the screen. Press the 

/

 buttons 

to change the hue. Change the setting if you want and confirm the new setting with 
the 

OK

 button. 

 
 

Aspect Ratio 

With this option you can define the aspect 
ratio during the displaying on the screen on 
by the video output. The settings are 4:3, 
PS, 16:9 and AUTO. Press the 

/

 but-

tons to change the aspect ratio. 
 
PS 
If you have a normal TV and want both 
sides of the picture to be trimmed or format-
ted to fit your TV screen. 
 
4:3 
If you have a normal TV. In this case , a wide picture with black bands on the upper 
and lower portions of the TV screen will be displayed. The 16:9 TV program are 
distorted. 
 
16:9 
If you have a wide-screen TV and want to display the transmitted 16:9 content in full 
screen on the LCD. But, transmitted 4:3 TV programs are also in full screen and so 
strong distorted. 
 
Auto 
The best option is the parameter Auto, because every TV program will be displayed 
in the transmitted aspect ratio without any distortion. The 16:9 content is in full screen 
and the 4:3 content shows on right or left side a black bar. 
 
 
Please refer the table on the next page to see what is happened by different transmit-
ted aspect ratio and the influence of the settings. 

Summary of Contents for HTL 400 T







































































Reviews: