5
EXEMPTIONS
We are not liable for:
1. Damage caused by fires, natural disaster (such as thunder, earthquake, etc.), acts
by third party, accidents, misuse, or use in other improper conditions.
2. Incidental damages (such as profit loss or interruption to business, modification or
erasure of data and so forth) caused by use or inability to use of this product.
3. Damage caused by neglect of instructions as described in the operating manual.
4. Damage caused by misuse or malfunction through simultaneous use of this product
and other connected equipment.
CABLE ENTRY PLATE CONNECTIONS
1. Connect the antenna cable (No.1) from LNB and the antenna cable (No.2) from
Controlbox antenna input to each other by using F connectors.
2. Connect motor cable female connector with 8 taps on the rear panel of the
Controlbox and the junction box to the each other with the power cable. (YSLY-
J 8x0.5mm²)
3. Connect motor control cable (No.3) from the antenna to the motor cable (No.4)
coming from the Controlbox with the connector terminals.
4. Fix the plastic guard on the motor cable by pushing towards the junction box,
after the connector connections are completed.
5. Lead the cable gland through the motor cable and fix it until the gasket is
tightened.
