EN
12
Initial installation
After sliding the main switch to the
ON
position, the power LED will first light up green. After a moment,
Please wait
followed by the start screen will appear on the screen. When the start process is com-
plete, the installation menu is displayed.
You can use the arrow keys ▲/▼ to switch between the menu items. If a menu item is highlighted in
colour, you can adjust it with the keys ◄/►.
OSD language
Select the language in which the on-screen menus will be
displayed.
Country
Select the country in which you want to operate the televi-
sion.
Antenna Power
If your antenna (e.g. an indoor antenna with amplifier without
its own power supply) must be supplied with power from the
TV via the antenna cable, switch on this function.
Note:
Antenna Power
must be switched
on
for the antenna that is
included in the package.
Channel search
Start the channel search with the
OK
key.
Note:
•
The search can take several minutes.
•
If the search does not find all channels, reposition your antenna or use a more efficient antenna
and start the search again (see page 20)
•
After moving to another region, you must run the channel scan again.
