13
C O N T R O L S
SILENCER________________________________
____
The silencer can limit false signals caused by iron. Use
position I or II if you desire a quieter search. Silencer in
position II will allow to get used to
GMAXX II
faster and will
improve iron rejection.
0 : Silencer OFF
I : Silencer (advised position)
II : Silencer X 2
Silencer in position O or I will enable you to find the decent targets which
are close to ferrous targets.
Position I or II is also a very useful setting in the Multi-Tone mode, since it
increases the detector's ability in the detection of ferrous objects and
reduces its differences between low and medium pitches.
By default, the GMAXX II is a triple-tone
detector, but users can set it to double tone mode using
a SILENCER switch:
Switch the SILENCER from position I to position II twice within
the space of two seconds. Your machine will then be in
Double-Tone LOW / MEDIUM mode, or in MEDIUM Mono-Tone
mode if the IRON THRESHOLD potentiometer is set at
minimum.
To go back to triple tone you will need to turn off the detector
& start again.
5
