© XPAND, All Rights Reserved.
www.xpandvision.com
The AE125H Secured Emitter. This emitter is designed for short-throw, wide-
screened theaters and visualization centers with up to 50 seats. Multiple emitters
can be connected in parallel for larger venues. The emitter is designed to be
placed near the projector and aimed at the screen, allowing the screen to spread
the reflected IR into the theatre.
Installation
1. Connect 24VDC power adapter to AC power outlet; use one of the included
interchangeable plugs that is appropriate for your region.
2. Insert power adapter’s output plug into AE125H’s power connector . AE125H
will turn on automatically and will be in stand-by mode; green LED will light
up.
3. Use included sync cable to connect your projector’s 3D-VESA (MINI-DIN-3
female) sync output connector to AE125H’s sync connector . If your projector
has a different 3D sync output connector please consult with our XPAND technical
support team.
Positioning and Mounting
»
AE125H will emit IR sync signal in one direction at ±25° angle.
»
For maximum range and coverage emitter should point towards theater
screen; red window cover facing towards screen.
»
There should be no obstacles between emitter and screen.
»
Emitter has four rubber feet so it can be securely placed on a flat surface.
»
Emitter is equipped with mounting hole which can be used with XPAND’s
Wall Mount (sold separately). When mount is used label should be pierced
with sharp object where it says “Mounting Hole”.
1
2
4
6
Summary of Contents for AE125H
Page 8: ...AE125H_M_eng_01 ...
