Xpand ONE ADE1512H, Installation Manual

© XPAND, All Rights Reserved. 

3 

www.xpandvision.com

System Overview

Like ANy XPAND 3D System, the XPAND ONe iR synchronization system generates 
the infrared signal that synchronizes the active 3D glasses with the digital projector. 

ADE1512H – XPAND ONE

Sync Distribution Module/Emitter Assembly

The ADe1512H receives the frame sync signal from the projector, converts it to 
XPAND’s proprietary synchronization pulse code and powers an iR array. in addition 
to the powerful iR array on the front side, the unit has a set of iR emitters on the back 
side that will flood the projection booth with the iR signal. These iR diodes can be 
turned off if necessary. The module is designed to be mounted on the window frame 
in the projection booth. its dimensions are 12.48” (317 mm) x 3.43” (87 mm) x 1.34” 
(34 mm), (width/height/depth). They add a minimum of 0.2’’ (5 mm) and a maximum 
of 0.5’’ (13 mm) to the vertical dimension of the emitter. The module weighs 17.28 
ounces (0,49 kg).  

Recommendation:

 Coverage of the XPAND ONe system is dependent on a mix of 

variables, such as the gain of the screen, the size of the screen, the throw distance 
from the projector to the screen and the size and configuration of the room. XPAND

ONe can be used in theaters with 

up to 125 seats, but this should be considered 

a limit.

 High gain screens give more iR reflection back into the center of the audience