Functionality
Glasses Overview
(1) Button (ON, OFF, TV selection)
(2) LED light
TV Manufacturer Codes
Samsung® or Mitsubishi®*
One Blink
LG®
Two Blinks
Sony®*
Three Blinks
Panasonic® or Toshiba®
Four Blinks
Philips®*
Five Blinks
XPAND Emitter
Six Blinks
*some TV models require the use of external emitter, please
check with your TV manufacturer
If you do not see your TV Manufacturer listed go to
www.xpandcinema.com/3dtv for a complete list
Turning On/Off Your Glasses
»
Step 1 ON: Press button (1) once
»
Step 2 LED light (2) will ramp from off to bright
»
Step 3 OFF: Press button (1) once
»
Step 4 LED light (2) will ramp from bright to off
Select TV
»
Step 1 While the glasses are on, press and hold the
button (1) for 3 seconds
»
Step 2 LED light (2) will blink once, corresponding to a
Samsung TV (See TV Manufacturer Codes above)
»
Step 3 Press button once to step through the other TV
options until you get to your TV Manufacturer
»
Step 4 If you have selected the correct TV
Manufacturer than sit back and enjoy your
program. Within 30 seconds the glasses will exit
the programming mode and store your selection in
memory. The glasses will always start up in this mode
the next time you turn the glasses on.
Set Glasses for use in XPAND Equipped Cinemas
»
Step 1 ON: Press and hold button (1) for 3 seconds
»
Step 2 LED light (2) will blink 3 times
Please, turn!
»
Step 3 OFF: Press button (1) once
»
Step 4 LED light (2) will ramp from bright to off
Battery Replacement
»
Step 1 Open battery compartment
»
Step 2 Take out the battery
»
Step 3 Insert new battery
»
Step 4 Close the battery compartment
Troubleshooting
Glasses don’t work: Make sure that glasses are turned on
in home mode and proper TV manufacturer was selected in
program mode. If problems persist try to turn ambient lights
off or shade windows if intensive sunlight is present. Make
sure that IR emitter on the TV is not blocked by some object
and that viewing angle is not too large.
Glasses don’t work with Samsung TV: On some models
there are intensive IR disturbances caused by backlight.
Try to reduce backlight setting on the TV until glasses
start working. Also make sure that IR emitter on the TV
is not blocked by some object and that viewing angle is
not too large.
Attention – Consult
Accompanying Documentation
Important Safety Instructions
»
Read these instructions.
»
Keep these instructions.
»
Heed all warnings.
»
Follow all instructions.
»
Do not use this apparatus near water.
»
Clean only with dry cloth.
»
Only use the attachments/accessories included.
Battery
Replace Battery With Type CR2032 Only.
Use of Another Battery May Present A Risk
Of Fire Or Explosion.
WARNING, Battery May Explode
If Mistreated. Do Not Recharge,
Disassemble, Or Dispose of In Fire.
Dispose Of Used Battery Promptly.
Keep Away From Children.
x103-quickinstall.indd 2
23.9.2010 16:24:31
