© 2018, XPAND 3D
11 www.xpandvision.com
Glasses should be held by the frame and/or ear handles in order to avoid
scratching the lenses or getting fingerprints on them.
The user must be aware of these limitations and avoid any twisting, bending
or other rough handling of the glasses.
Troubleshooting
If glasses do not work as expected and as described in this user manual,
first make sure that a XPANDVISION 3D IR emitter is being used, that glasses
are in range of its signal, that the emitter is connected to a projector and
that the projector is in 3D mode. If despite this glasses don’t work, replace
batteries to make sure they are not empty.
Attention – Consult Accompanying
Documentation
Important Safety Instructions
»
Read these instructions.
»
Keep these instructions.
»
Heed all warnings.
»
Follow all instructions.
»
Only use the attachments/accessories included or suggested by these
instructions.
Battery
Replace Batteries With Original Batteries Provided by
XPANDVISION™. Use of Different Batteries May Present A Risk
Of Fire Or Explosion.
WARNING, Battery May Explode If Mistreated.
Do Not Recharge, Disassemble, Or Dispose of In Fire.
Dispose Of Used Battery Promptly.
Keep Away From Children.
