background image

Appendix C. Glossary

98

 

iX104AtR User’s Handbook

Port

. The electrical connection through which the computer sends 

and receives data to and from devices or other computers.

Program

. A set of instructions a computer can execute to tell the 

system what to do and how to do it.

Random Access Memory (RAM)

. A hardware component of your 

computer that temporarily stores active program code and data.

Reset

. The act of reloading the operating system.

Resolution

. The number of pixels displayed on the screen. A higher 

resolution provides greater clarity and allows more information to be 
displayed on the screen at once.

Restart

. Resetting a computer without turning it off (also called 

warm boot or soft reset).

Resume

. The act of returning the computer to an active, operational 

state.

Read Only Memory (ROM)

. The portion of your computer’s 

memory that contains permanent instructions, and which cannot be 
modified.

Status Indicator (LED)

. a light above the LCD screen which 

indicates the current status of a particular device or hardware 
component.

Stylus

.

 

A writing instrument. For pen computers, the stylus is used to 

interface with the LCD and digitizer.

Subscriber Identity Module (SIM).

 A smart card inside a GSM 

(Global System for Mobile communications) cellular device that 
encrypts voice and data transmissions and stores data about the 
specific user so that the user can be identified and athenticated by the 
network supplying the phone service. A SIM can be moved from one 
device to another and/or different SIMS can be inserted into any GSM 
radio.

Summary of Contents for iX104AtR



























































































































Reviews: