background image

Appendix E. Agency Notices

iX104C

User’s Handbook

 

113

International Commission on Non-Ionizing Radiation Protection 
(ICNIRP) 1996

Ministry of Health (Canada), Safety Code 6. The standards include a 
substantial safety margin designed to assure the safety of all persons, 
regardless of age and health.

The exposure standard for wireless mobile tablet PCs employs a unit of 
measurement known as the Specific Absorption Rate, or SAR. The SAR limit 
set by the FCC is 1.6W/kg.

Note:

In the U.S. and Canada, the SAR limit for mobile tablet PCs used by 

the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The 
standard incorporates a substantial margin of safety to give additional 
protection for the public and to account for any variations.

DOC (Industry Canada Notices)

Notice to Users of Radio and Television

This Class B digital apparatus meets all requirements of Canadian 
Interference-Causing Equipment Regulations
CET appareil numérique de la class B respecte toutes les exigence du 
Réglement sur le matérial brouilleur du Canada.

Notice to Users of the Canadian Telephone Network

Notice:

This equipment meets the applicable Industry Canada Terminal 

Equipment Technical Specifications. This is confirmed by the registration 
number. The abbreviation, IC, before the registration number signifies that 
registration was performed based on a Declaration of Conformity indicating that 
Industry Canada technical specifications were met. It does not imply that 
Industry Canada approved the equipment.

Before connecting this equipment to a telephone line the user should ensure 
that it is permissible to connect this equipment to the local telecommunication 
facilities. The user should be aware that compliance with the certification 
standards does not prevent service degradation in some situations.
Repairs to telecommunication equipment should be made by a Canadian 
authorized maintenance facility. Any repairs or alterations not expressly 
approved by Xplore or any equipment failures may give the 
telecommunication company cause to request the user to disconnect the 
equipment from the telephone line. 

Summary of Contents for ix104c4







































































































































Reviews: