22 Connecting to a Mobile Broadband Network
Chapter 2
Using Your L10 Tablet
Connecting to a Mobile Broadband
Network
Important:
Before you can connect to a mobile broadband network, you must have your L10
tablet configured with a WWAN card, an active account with a cellular network provider
and
a
SIM card in your tablet for mobile broadband access. This SIM card works like the SIM card in
your cell phone that connects you to a network provider.
Inserting a SIM Card
The SIM card holder accommodates two Nano SIM (4FF) cards, for use with the mobile broadband
option. If inserting only one SIM card, place it in the holder labeled
SIM1
. If inserting two SIM cards,
put the card for the primary carrier in SIM1 and the card for the secondary carrier in the other SIM
slot.
1. Turn off the tablet.
2. Remove the battery.
3. Find and gently remove the SIM holder tray so the slot is empty.
4. Place the SIM card into the holder so that it is close to flush with the holder. Make sure that
the SIM contacts (gold) are facing down and the notched corner is on the right side as shown
in this drawing and in the graphic inside the battery bay of the tablet.
Notched corner
The holder can hold two SIM cards. If you have two SIM cards, insert the second one into the
holder in the same way.
Empty SIM
card slot
SIM card slot with holder
Summary of Contents for iX10101L2
