Chapter 2. Using the Tablet
Using the battery
46
iX104C5
User’s Handbook
Using the battery
You can recharge, remove, and replace the battery pack.
Charging the battery pack
If you do not have an external battery charger
Follow these steps to charge the battery while it is installed in the
computer:
1.
Connect a power source, such as an AC adapter or cigarette
lighter adapter, to the power connector on the computer.
If the battery charge is below 95%, the battery begins charging
and the Status LED flashes green. (If the battery charge is higher
than 95%, the battery will not charge, preventing battery
overcharge.)
2.
Check the level of charge. (See “Checking battery power status”
on page 50.)
The charging process continues until the battery charge
reaches 100%.
Power
connector
Summary of Contents for iX104C5
