Xplova X3 Quick Start
Guide
EN-2
EN
Installing your X3
Please follow the steps below to mount your X3 on
the bike:
1. Hold the bike mount on top of the rubber pad
evenly together ensuring they are aligned squarely
to each other. Then place them on the bike
handlebar.
2. Loop an elastic band
from one tab of the bike
mount. Stretch the free
end of the elastic band
underneath the bike
handlebar and up to the
other tab. Ensure the
bike mount stays in
place securely.
3. Align the latch on the back of X3 with the bike mount
notch. Press downward slightly and turn X3 until it
locks in place.
Charging your X3
1. Please use a standard Micro-USB charger with a
5V charging port. The battery will be fully charged
within 3 hours.
2. Please pull out the weather cap from the Micro-
USB port with care to prevent breakage or
deformation. Any damage to the weather cap
may reduce its ability to resist dust and moisture.
