https://www.XPOtool.com
Item 61479
Page 3
The Tool Experts
04 2022
-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
•
The wheel bearing tool may only be used for its intended purpose.
Attention!
When parts to be removed are loosened, the puller might spring back with the loos-
ened component thus representing a danger. Therefore, never stand behind the puller in the
direction of a possible rebound.
•
Always wear personal protective equipment.
•
Before each use of the wheel bearing tool, carry out a visual inspection to identify any damage
and, if necessary, replace a damaged part.
•
Any part that might have been overloaded must be taken out of service immediately.
•
Before straining individual threads, make sure that enough thread turns are engaged.
Scope of delivery
Name
Qty.
Name
Qty.
Adapter plate
⌀
50
mm
1
Bushing
⌀
83.4
mm
1
Bushing
⌀
55
mm
1
Sleeve
⌀
76
mm
1
Bushing
⌀
59
mm
1
Sleeve
⌀
86
mm
1
Bushing
⌀
63.3
mm
1
Sleeve
⌀
91
mm
1
Bushing
⌀
66.6
mm
1
Sleeve
⌀
102
mm
1
Bushing
⌀
70.3
mm
1
Disassembly screw M12×1.5 (for the disas-
sembly of the wheel hub)
3
Bushing
⌀
71.5
mm
1
Disassembly screw M14×1.5 (for the disas-
sembly of the wheel hub)
3
Bushing
⌀
73.1
mm
1
Extracting screw 22.2
mm×300
mm
1
Bushing
⌀
73.4
mm
1
Thrust bearing
3
Bushing
⌀
74.8
mm
1
Screw-down nut SW 32 × 60
mm
1
Bushing
⌀
77.5
mm
1
Pressure sleeve
⌀
38 × 40
mm
1
Bushing
⌀
81.5
mm
1
Pressure sleeve
⌀
40 × 3
mm
1
