https://www.XPOtool.com
Item 61479
Page 4
The Tool Experts
04 2022
-1
Removal
Step
1
Choose the disassembly screw depending on the wheel bolt thread – M12×1.5 or M14×1.5 – and screw
it into the thread of the wheel hub.
Attention!
Two points of support on the wheel bearing housing are
not necessary. Alternating support on one side of the wheel bearing housing can be done as described
in the following:
1.
Turn the disassembly screw until the point of support.
2.
Turn the disassembly screw one more turn.
3.
Relieve the screw by turning it back.
4.
Turn the wheel hub 180° until the second screw touches the point of support.
5.
Proceed with the other screw in the same way as described from step 3.
Attention!
Always work steadily to prevent tilting.
Step
2
Use suitable pliers to remove the retaining ring.
