https://www.XPOtool.com
Item 61479
Page 7
The Tool Experts
04 2022
-1
Attention!
Ensure that the wheel hub is inserted cleanly and is not tilted. Finally, the rear retaining ring
is removed.
Adapter plate
The 50-mm plate is used to hold all bushings for use with a shop press.
Maintenance and care
The threads of the extracting screw and press-off bolts are exposed to high strain. All threads must be
clean and lubricated when used. The threads of the extracting screw and press-off bolts should be
lubricated with a heavy-duty grease before each use.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.
