https://www.XPOtool.com
Item 61966
Page 6
The Tool Experts
05 2022-1
Keep the machine in constant motion because otherwise recesses could be produced in the
material.
Cleaning and maintenance
To clean the motor, blow compressed air through the rear ventilation slots of the machine regularly,
frequently and thoroughly. Therefore, the machine must be held firmly.
Accessories
Use only original accessories. If you need any accessories, check with your dealer. The dealer needs
to know the exact model of your power tool to select the correct accessory.
Information on noise and vibration
•
Noise determined according to EN 60745. The typical sound pressure level of appliance deter-
mined with a filter A product are: sound pressure level 68
dB(A); sound power level 99
dB(A);
tolerance K=3
dB.
WEAR A HEARING PROTECTION!
•
Total vibration values (vector sum of three directions) determined according to EN 60745: sand-
ing drywall a
h
=4
㎨
, K= 3
㎨
.
•
The vibration emission level given in this information sheet has been measured in accordance
with a standardized test given in EN 60745 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
•
The declared vibration emission level represents the main applications of the tool. However, if
the tool is used for different applications, with different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase the exposure level over the total
working period.
•
An estimation of the level of exposure to vibration should also take into account the times when
the tool is switched off or when it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
•
Identify additional safety measures to protect the operator from the effects of vibration such as:
maintain the tool and the accessories, keep the hands warm, organization of work patterns.
