background image

 

https://www.XPOtool.com 

 

Item 62547

 

Page 5

 

The Tool Experts

 

 

  

 

05 2022-1

 

 

Disconnect  the  device  from the  power supply and let it cool down  before cleaning,  maintaining, and 
storing it. The liquid could be contaminated due to leaking lubricants.

 

 

Caution!

 

It is not possible to repair the electric parts of this pump. The power cord cannot be replaced. 

If the power cord or the plastic-encased and encapsulated motor piece is damaged, the entire device 
must be scrapped.

 

 

Warning!

 Electric shocks can be dangerous to life. Therefore, absolutely obey the following in-

structions:

 

 

 

The pump can only be operated on a properly earthed and insulated socket.

 

 

Caution!

 On standing water, garden ponds, swimming ponds and near them, the pump can only be 

used with a fault current circuit breaker with a rated current of up to 30

 

mA. Observe local regulations 

for connection to power supply, too. The pump must not be operated in swimming pools, paddling pools 
of  any  kind  or  other  water  bodies  with  people’s  or  animals’  being  present  during  operation.  It  is  not 
permitted to operate the pump while people or animals are in the danger zone.

 

 

 

Pumps equipped with a 10

 

m mains cable, min. H05RN-F, can only be operated outside of build-

ings.

 

 

Pull the power plug before any maintenance work.

 

 

Should the pump cable or the plug be damaged, the cable must not be repaired. In that case, 
the pump must not be operated any longer.

 

 

The pump can only be used for pumping water.

 

 

The pump must never be suspended from the pressure line or a live cable.

 

 

The pump must be protected from frost.

 

 

Children must not have access to the pump; take the appropriate preventive measures.

 

 

Using power cords, extension cords, connection cords or adaptors without safety contact is not 
permitted.

 

 
 

Main components and scope of delivery

 

 

Main components (Fig.

 

1)

 

 

 

Name

 

 

Name

 

1

 

Fountain pump

 

6

 

Fountain tube

 

2

 

Suction basket with BIOCELL insert

 

7

 

Stepped fountain

 

3

 

Transport handle

 

8

 

Bell-shaped fountain

 

4

 

Sleeve

 

9

 

Bubbles-forming fountain

 

5

 

Spout connection

 

 

 

 

Scope of delivery

 

 

 

Open the packaging to carefully take out the device.

 

 

Remove the packaging material as well as all packaging and transport locks (if present).

 

 

Check the delivery for completeness.

 

 

Check the device and its accessories for transport damages.

 

 

If possible, keep the packaging until the expiration of the warranty period.

 

 

Warning!

 

The device and  its packaging  material are  not children’s toys! Children must no play  with 

plastic bags, foils, and small parts! There is a risk of swallowing and suffocation!

 

 

 

Summary of Contents for 62547











Reviews: