https://www.naturewater.eu
Item 63014, 63015
Page 3
The Tool Experts
10 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
•
Do not fail to familiarise yourself with the safety regulations before commissioning. Read them
thoroughly and obey all safety regulations and instructions to avoid any material damage or
personal injury.
•
Only use the device according to the intended use defined in this manual. Every incorrect use
might lead to injuries and/or damages.
•
This device may only be used by persons with reduced physical, sensory, or mental abilities
or a lack of experience or knowledge in case a person familiar with the device and responsible
for their safety has instructed and supervises them.
•
Children must not use the device and should be supervised when they are near it to ensure
that they do not play with it.
•
Under no circumstances should you direct the device towards your body or other persons’
bodies or animals.
•
The maximum capacity must not be exceeded.
•
Before every use, check all connections and hoses. Ensure that they are correctly connected
and are in a perfect condition.
•
Should the device or one of the hoses connected be damaged, it must not be used any longer.
Risk of injuries!
•
Only use the device in well-ventilated rooms.
•
During use, wear appropriate safety equipment (protective goggles, protective gloves, breath-
ing protection).
•
Do not use the device near possible sources of ignition (e.g., cigarettes, open flames, etc.).
Paints, thinners, and solvents are highly flammable and must therefore be handled with care.
Obey the warnings and safety instructions given by the manufacturer of the pain, thinner, or
dissolvent.
•
Clean the device after every use.
•
Only have repairs made by qualified persons.
Start
1.
Tighten the liquid nozzle with a wrench.
2.
Tighten the air cap and paint cup.
3.
Check all airlines and connections to make sure that they are clean and undamaged before
connecting them to the gun.
4.
Thoroughly rinse the gun with a cleaning agent.
Adjusting the nozzles
Use the nozzle setting on the left side of the gun to realise the desired pattern.
Adjusting the liquid
Use the liquid regulator to define the desired flow rate.
