https://www.XPOtool.com
Item 63027
Page 3
The Tool Experts
01 2022
-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Warning symbols and their meaning
Sign indicating a safety hazard. It is intended to draw your attention to a possible
risk of injury. Therefore, follow all safety instructions that follow this sign. This will
help you avoid possible injury or even death.
Danger!
Sign indicating a dangerous situation which, if not avoided, will result in serious
injury or death.
Warning!
Sign indicating a dangerous situation which, if not avoided, might result in serious
injury or death.
Caution!
Sign indicating a dangerous situation which, if not avoided, could result in minor or
moderate injury.
Note! Attention!
Sign not associated with a risk of injury.
Important safety instructions
The following safety warnings draw your attention to the risk of fire, electric shock, or personal injury.
Basic precautions should always be taken when using tools, including but not limited to the following.
To avoid the risk of fire, electric shock, or injury, carefully read this manual before using the tool.
Work area safety
•
Keep your work area clean and provide adequate lighting. Untidy workbenches and insufficiently
lit work areas increase the risk of electric shock, fire, and injury.
•
Do not use the tool in environments with a risk of explosion, for example near flammable liquids,
gases, or dust. When using the tool, sparks can be created, which can ignite these substances.
•
Keep spectators, children, and visitors away from the work area when operating the tool. Dis-
tractions may cause you to lose control of the tool.
Personal safety
•
Remain attentive. Focus your full attention on what you are doing and use common sense. Do
not use the tool when being tired or under the influence of alcohol, drugs, or medication. A
moment of carelessness while using the tool increases the risk of injury.
•
Dress appropriately. Do not wear loose clothing, jewellery, or other accessories. Tie up or cover
long hair. Keep long hair, clothing, accessories, and gloves away from moving parts. Otherwise,
they might get caught by them, which increases the risk of injury.
•
Avoid unintentional start-ups of the tool. Make sure that the switch is in the “off” position before
connecting the air supply. Do not put your finger on the trigger of the tool while carrying it and
do not connect it to the air supply with the switch in the “on” position.
•
Remove all keys before using the tool. A key still attached to a rotating part increases the risk
of injury.
•
Do not lean too far. Make sure to have a secure stand and always keep your balance. A secure
stand and balance allow for better control of the tool if an unexpected situation arises.
•
Always wear appropriate safety equipment consisting of, but not limited to a dust mask, non-
skid safety shoes, thick work gloves and a helmet, when working with the tool.
•
Protect your eyes. Wear approved safety glasses when working.
