- 5 -
- 4 -
Operation Instructions
Safety Instructions
XPOWER High Static Blowers are intended to fill up inflatables, advertising displays, structures,
etc. Durable and easy to operate with an effective balance of static pressure and airflow, the
units are suitable for a variety of applications.
1. XPOWER High Static Blowers are shipped ready-to-use. Prior to plugging the unit into the
power source, inspect completely for any shipping damage.
2. With the unit unplugged, carefully place the unit on stable, flat, and dry surface.
3. Snugly attach your inflatable tube around the exhaust opening by using the velcro strap or
any other form of tightener.
4. Plug the cord into a grounded GFCI outlet only. Using a 3-prong to 2-prong adapter is strictly
prohibited.
5. Turn on the switch (except BR-6) to make sure the blower is operating correctly and the
inflatable functions properly. BR-6 will work automatically when connected to power source.
6. All blowers in operation must be supervised at all times.
1. Never place the XPOWER High Static Blowers in close proximity to any heat source or open flame. The
inflatable is flammable and could cause a fire and serious injury if not handled properly.
2. Do not operate the unit close to any dangerous areas such as explosive gases, flammables, heaters
and unventilated environments that may result in explosions or electrical hazards.
3. Do not operate the blower without the inflatable attached because the blower must have back
pressure in order to avoid any damage to the motor.
4. Keep children away from the unit at all times while in operation or plugged in. This product is not a toy
and should only be used for its intended purpose.
5. Do not put fingers or other objects in any part of the unit while it is in operation or plugged in.
6. To prevent electric shock, do not drop unit into water, never plug in or unplug the appliance with wet
hands or while standing in water.
7. Avoid sands, small rocks and other small objects being sucked in the blower.
8. To avoid risk of injury, do not direct stream of air at face or body.
9. If the power cord is damaged, it must be replaced by the XPOWER Manufacture, Inc. or an XPOWER
authorized service agent or a qualified electrician in order to avoid a hazard.
10. Do not operate in pooled or accumulated water to avoid electric shock.
(Continued at Page 6)
