English - 4
English - 5
Operation Guide
Air Mover Introduction
The XPOWER Air Mover produces a plentiful
airflow capacity for small to large jobs for any
location size.
It is ideal for drying tight spaces such as crawl
spaces, under counters, inside cabinets,
bathrooms, auto interiors, and more.
It’s also designed for professional carpet
cleaning, water damage restoration jobs, or
home use.
Drying A Floor
Drying A Wall Or Ceiling
20°
45°
90°
Single Unit:
Place the air
mover at the
corner to create
circular airflow.
Multiple Units:
Place the air
movers at four
corners to create
circular airflow.
Multiple Operating Positions:
The air can operate at different
positions, directing the airflow to
desired areas.
Switch Plate
Additional Electrical Receptacle (Daisy Chain)
OFF
1
120
60
0
ON
180
2
3
CIRCUIT
BREAKER
12A
TOTAL OUTPUT
12 AMPS MAX WITH THIS UNIT OFF
9.5 AMPS MAX WITH THIS UNIT ON
Speed Switch
Turn to “
OFF
” position
to switch the air mover
OFF. Turn to any speed
position to switch the
air mover ON.
Turn clockwise to set
the desired fan speed.
There are 3 fan speeds
from:
1
,
2
,
3
. “
1
” is the
lowest speed and “
3
”
is the highest speed.
Timer Switch*
Turn clockwise to set timer
for minutes count down to
an automatic stop.
The timer can be set for
up to 180 minutes (3
hours).
When the timer reaches
“
0
” position, the unit
stops working. On “
ON
”
position, it will work
constantly.
* The timer switch function does not apply to all models mentioned in this manual.
Reset Button
Electrical Receptacle
Other appliances can be plugged in the additional electrical receptacles and work
whether the air mover is on or off. However, the total amperage must be lower than the
amperage instructed. Different models may have varying instructions.
If the air mover or the plugged in appliance stops working, press the
RESET BUTTON
to reset the circuit.
Summary of Contents for P-80 Series
Page 6: ...English 10 English 11...
