English - 6
English - 7
User Maintenance Instructions
Troubleshooting Guide
Frequent maintenance is recommended on this appliance. Failure to follow the
maintenance instructions may cause failure of the appliance and void the warranty.
* The timer switch function does not apply to all models mentioned in this manual.
If troubleshooting does not resolve your problem, please contact XPOWER or other
parties authorized by XPOWER for further instructions.
When not in use, unplug and store the appliance in a dry and cool indoor place. Make
sure it’s out of reach of children.
Before performing any maintenance or cleaning, always disconnect the air mover from
its power source.
Use a damp cloth to wipe the surface of the housing. Do not clean the unit with water
directly.
Check if the grille covers are clean. Remove dirt or any other objects that could block
the air inlet and air outlet.
Do not stack more than four units of this appliance.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Air mover does not
start
No electricity.
Check for power supply.
The power cord is not properly
plugged in.
Remove and reconnect the
power cord.
The machine is working under
an extreme temperature.
Turn off the machine and
unplug it. Let the machine
cool down to normal
temperature.
The circuit breaker on the
additional electrical receptacle
(Daisy chain) jumps.
Remove all appliance on
the additional electrical
receptacle and press “Reset”.
The timer switch is set to “0”
position.*
Set the timer switch to “ON”
position.*
Unit runs but the
speed is abnormal
Air inlet or air outlet is blocked. Remove blockage.
Storage
OF
F
1
1
2
0
6
0
0
ON
1
80
2
3
OF
F
1
12
0
60
0
ON
180
2
3
OF
F
1
12
0
60
0
ON
1
80
2
3
OF
F
1
12
0
60
0
ON
1
80
2
3
OF
F
1
12
0
60
0
ON
180
2
3
OF
F
1
12
0
60
0
ON
180
2
3
Stack Multiple Units
Stack the air movers
on the sides. Align the
air inlets of both air
movers.
Turn the second air
mover 30°.
Organize the Cord
Wrap the power cord around
the switch plate for storage
after use.
Use convenient clip at end of
cord to secure in place.
WARNING
Do not stack more
than four units of
this appliance.
Stacking function is
not secure during
transportation.
!
Operation Guide
(Continued)
OFF
1
120
60
0
ON
180
2
3
Summary of Contents for P-80 Series
Page 6: ...English 10 English 11...
