XPower X-3300, Owner'S Manual

In order to remove airborne particles from the surrounding environment, XPOWER Air Scrubbers 

are designed to draw air through a series of filters and deliver the purest air. Each filter stage 

operates with progressively higher efficiency. The unit removes airborne particles like hair, skin 

flakes, visible dust, mold spores, pollen, pet dander and miscellaneous debris. 

1. XPOWER Air Scrubbers are shipped ready-to-use. Prior to plugging the unit into the power 

    source, inspect completely for any shipping damage.

2. Carefully place the Air Scrubber upright on a stable, flat dry surface.

3. Plug the electrical cord into the power outlet.

4. The unit can be used in 2 different angle positions: vertical and horizontal.

5. Turn the control knob to desired speed and make sure the unit operates normally.

6. To reduce the risk of injury, close supervision is necessary when the machine is used near 

    children. Do not allow children to play with, or around the Air Scrubber at any time.

Operation

Filter Change (Clean) Light

The Red Filter Change Light will illuminate when 

accumulated debris is over-saturated, and filter 

needs to be cleaned. If the light is still illuminated

after the filters are cleaned, the filter(s) possibly

need to be replaced.

** Actual parts are not limited on this list, contact XPOWER for ordering parts.

Item No

. 

Parts Name 

Item No

. 

Parts Name 

1 

2 

Air Inlet 

3 

Inlet Panel 

4 

Latch 

5 

16”x16” 

Nylon Mesh Filter

6 

Activated Carbon Filter 

7 

1.4" Thic

k

 HEPA Filter

8 

9 

Front Housing 

10 

Pressure Switch 

11 

Fan 

12 

Motor 

13 

HEPA Filter Change Light 

14 

Speed Control Knob 

15 

Control Panel 

16 

Potentiometer 

17 

Air Outlet Grill 

Rear Housing 

Parts List 

Washable outer nylon mesh filter

Washable