background image

1. To keep the Air Scrubber clean, use a damp cloth to wipe the surface of the housing.

2. Never clean the Air Scrubber unit directly with water (see following pages for proper filter cleaning 

    instructions).

3. When not in use, unplug and store the Air Scrubber in a dry indoor place out of reach of children.

4. Always disconnect the Air Scrubber from its power source before performing any maintenance or 

    cleaning.

- 11 -

Maintenance

Basic routine maintenance of filters is required to optimize performance of your air scrubber and 

extend the life of primary filters. 

Both the XPOWER X-3300 and X-3500 filtration system include easy 

to clean, washable nylon pre-filters that should be frequently maintained. 

Monitor filters and clean or change out once they become loaded with 

particles. The air scrubber begins to reduce airflow and increase 

pressure drop. Overly loaded filters not only restrict CFM, they can also 

result in a loss of filtration efficiency. XPOWER Air Scrubbers include 

on-board pressure sensors that automatically alert the Filter Change 

(Clean) Light when the filters need cleaning. The filter may needs to be

changed after using for a quite long period.

Important: Filter Maintenance and Replacement

Loaded Filter

WF35

 – Two layers of washable PET Purifying Filters are featured with the X-3300 Air Scubber. 

These filters trap smaller contaminants to alleviate allergies and other common respiratory problems. 

The Primary WF35 filters require a simple maintenance routine for effective performance.The Filter 

Change Light will light up when filters need attention. Always make sure that the Air Scrubber is turned 

off before removing filters. 

Cleaning X-3300 PET Purifying Filters (WF35):

1. Remove filters and lay them on a flat clean surface

2. Use a vacuum or clean cloth to remove loose debris

3. Rinse thoroughly with water

4. Lay on a flat surface on top of a clean cloth to completely dry before reinstalling

X-3300 Primary Filter Care

ATTN: 

ONLY the X-3300 Features 

4 Washable Filter Stages. DO NOT 

WET X-3500 Model primary Filters 

(Carbon CF35 & HEPA35) 

Summary of Contents for X-3300































Reviews: