XPower X-3300, Owner'S Manual

- 12 -

Always wear a respirator and personal protective gear when removing or replacing filters. Lay 

the Air Scrubber flat, unlock top latch of the housing, open the inlet panel and remove filters.

- 14 -

CF35

 - Activated Carbon Filters are used to remove contaminants and impurities through the process 

of chemical absorption. The CF35 captures a wide variety of volatile organic compounds that includes 

smoke, food odors, fumes from paint and paint thinners, sewer odors and more. Carbon Filters can be 

reused if the adsorbed substances are removed. This process is known as 'regeneration'. Simply 

heating the spent carbon at a given temperature for an adequate length of time can regenerate activated 

carbon to the point where it can be reused. The CF35 fits the X-3500 model; it is placed inside the 

housing in front of the HEPA filter. Always make sure that the Air Scrubber is turned off when removing 

the carbon filter. Never use water to clean the CF35 filters. Use vacuum or clean cloth and lay it flat on 

a clean and dry surface. For best results, put the CF35 under the sun and leave it there for a couple of 

hours. The capacity of the carbon filter will vary widely depending on conditions, but it should be replaced 

when a decline of effectiveness is noted.

Precautionary Measure When Cleaning and Changing Filters

An air scrubber captures particles that can be hazardous to human health. 

During the process of changing filters, decontamination, or performing 

maintenance, large concentrations of captured particles can become 

airborne in the immediate area. For these reasons, air scrubber operators 

should wear appropriate personal protection equipment (PPE) when 

performing any type of service on an air scrubber. A NIOSH-approved 

respirator is always essential for these tasks. If you’ve used the air scrubber 

for mold remediation or in another environment with known contaminants, 

you should also consider wearing gloves, eye protection and coverall

NIOSH-Approved 

Respirator Mask

The particles captured by a filter can cause adverse human health effects once they are released into 

the air. For this reason, you should dispose of used filters with care. You should place used filters in a 

plastic bag and seal the top before disposing. Always follow local regulations before disposing. 

Disposal of Filters

The filters may need to be changed after certain period of time depending on your usage and the life of 

each type of filters

. 

All filter accessories are available for purchase directly from XPOWER's headquarters in California.

Please call our Customer Service at (626) 376-0190 or email us at info@xpower.ws.

X-3500 Primary Filter Care

Filter Replacement