background image

Button

Function

Lock the doors and arm the factory alarm.

Unlock the doors and disarm the factory alarm.

Open the trunk.

Panic ON: press the LOCK button and hold it for at least 4 seconds.

Panic OFF: press the UNLOCK button.

Start the vehicle.

Stop the vehicle (hold button for at least 4 seconds).

Set car to idle mode when it is already running.

Cold Weather Start feature (see page 9 for more information).

Open and close the sliding door (driver side). Only accessible with Chrysler Town & Country 
2008-2010, Dodge Grand Caravan 2008-2010, and Volkswagen Routan 2009-2010.

The remote transmits a visual confirmation by means of an LED. Immediately following a 
transmission, the LED will flash (single blink) green if the command was successfully 
received by the system or red if the command was not received.

In the case of a start command, the LED provides a first confirmation to acknowledge the 
command reception by the system then, a second confirmation is sent to indicate if the 
starting was successful or not.

Page 3

+

+

+

Listing the Available Commands

2-Way LED & LCD Remote Start Kits

Rev.: 20091218

© 2009 Directed Electronics. All rights 

Model: CHRSALL RS-CHLED & RS-CHLCD

Summary of Contents for CHRSALL RS-CHLCD











Reviews: