SAFETY NOTES
•
The user of the Neo Motion LED must have read and understood these operating instructions prior to its first use
in order to safely use this product.
•
The LEDs must only be used when they functions properly. If the LEDs or part of the LEDs are defective, please
contact your retailer for advice and cease to use the lighting function.
•
Always keep the operating instructions within reach.
•
If you sell or pass on the device, you must also pass on these operating instructions.
•
Never use the LED function in a room where there is a danger of explosion or in the vicinity of flammable liquids
or gases.
•
The LEDs may only be connected to a grounded socket which has been installed professionally, is grounded and
checked.
•
Main power voltage and fuse must meet the Technical data specifications.
•
If the power cable or the device is damaged immediately turn off the plug and pull out the plug. Do not use the
Cable again and dispose of it properly.
•
Do not bend, crush or pull the cable, protect from sharp edges, oil and heat.
•
If the LEDs are not in use make sure the plug is pulled out.
•
Do not touch the power connector with wet hands! Always unplug by pulling the connector, not the cable.
•
Do not lift the bed using the cable or use the cable for purposes other than intended.
•
The power cable may not be shortened.
EN
Risk of damage to the eyes! Never look directly into the LED.
The light can only be used in dry indoor areas.
Not suitable for ordinary lighting in household room illumination
Turn on
1
Turn off
2
Adjust the light darker/ Adjust the colour
change slower
3
Adjust the light brighter/ Adjust the colour
change quicker
4
Change every colour for every colourful button
5
The colour jump change
6
The colour gradient
Seven colour gradient
7
8
Seven colour jump change
9
RGB LED ‘NEO FIBRE’ LIGHTING INSTRUCTIONS
Remote Control Function
OFF
ON
R
G
B
W
FLASH
STROBE
FADE
SMOOTH
3
4
5
6
7
8
9
1
2
26
Summary of Contents for AVA LDSK3RL1-430
