background image

2

BEFORE YOU START

The T2‘008 is a high-competition, high-quality, 1/10-scale touring car intended 
for persons aged 16 years and older with previous experience building and 
operating RC model racing cars. This is not a toy; it is a precision racing model. This 
model racing car is not intended for use by beginners, inexperienced customers, 
or by children without direct supervision of a responsible, knowledgeable adult. 
If you do not fulfill these requirements, please return the kit in unused and 
unassembled form back to the shop where you have purchased it.

Before building and operating your T2‘008, YOU MUST read through all of the 
operating instructions and instruction manual and fully understand them to get

the maximum enjoyment and prevent unnecessary damage. Read carefully and 
fully understand the instructions before beginning assembly.

Make sure you review this entire manual, the included set-up book, and examine 
all details carefully. If for some reason you decide the T2‘008 is not what you 
wanted or expected, do not continue any further. Your hobby dealer cannot 
accept your T2‘008 kit for return or exchange after it has been partially or fully 
assembled.

Contents of the box may differ from pictures. In line with our policy of continuous 
product development, the exact specifications of the kit may vary without prior 
notice. 

SAFETY PRECAUTIONS

Contains:
LEAD (CAS 7439-92-1) ANTIMONY (CAS 7440-36-0)
WARNING: This product contains a chemical known to the state of California to 
cause cancer and birth defects or other reproductive harm.
CAUTION: CANCER HAZARD
Contains lead, a listed carcinogen. Lead is harmful if ingested. Wash thoroughly 
after using. DO NOT use product while eating, drinking or using tobacco 
products. May cause chronic effects to gastrointestinal tract, CNS, kidneys, and 
blood. MAY CAUSE BIRTH DEFECTS.

When building, using and/or operating this model always wear protective 
glasses and gloves.

Take appropriate safety precautions prior to operating this model. You are 
responsible for this model‘s assembly and safe operation! Please read the 
instruction manual before building and operating this model and follow 
all safety precautions. Always keep the instruction manual at hand for quick 
reference, even after completing the assembly. Use only genuine and original 
authentic XRAY parts for maximum performance. Using any third party parts on 
this model will void guaranty immediately.

Improper operation may cause personal and/or property damage. XRAY and 
its  distributors have no control over damage resulting from shipping, improper 
construction, or improper usage. XRAY assumes and accepts no responsibility for 
personal and/or property damages resulting from the use of improper building 
materials, equipment and operations. By purchasing any item produced by XRAY, 
the buyer expressly warrants that he/she is in compliance with all applicable 
federal, state and local laws and regulation regarding the purchase, ownership 
and use of the item. The buyer expressly agrees to indemnify and hold harmless 
XRAY for all claims resulting directly or indirectly from the purchase, ownership 
or use of the product. By the act of assembling or operating this product, the 
user accepts all resulting liability. If the buyer is not prepared to accept this 
liability, then he/she should return this kit in new, unassembled, and unused 
condition to the place of purchase.

 IMPORTANT NOTES – GENERAL

•  This product is not suitable for children under 16 years of age without the 

direct supervision of a responsible and knowledgeable adult.

•  Carefully read all manufacturers warnings and cautions for any parts used in 

the construction and use of your model.

•  Assemble this kit only in places away from the reach of very small children.
• First-time builders and users should seek advice from people who have 

building experience in order to assemble the model correctly and to allow the 
model to reach its performance potential.

•  Exercise care when using tools and sharp instruments.
•  Take care when building, as some parts may have sharp edges.
•  Keep small parts out of reach of small children. Children must not be allowed 

to put any parts in their mouth, or pull vinyl bag over their head.

•  Read and follow instructions supplied with paints and/or cement, if used (not 

included in kit).

• Immediately after using your model, do NOT touch equipment on the 

model such as the motor and speed controller, because they generate high 
temperatures. You may seriously burn yourself seriously touching them.

•  Follow the operating instructions for the radio equipment at all times.
•  Do not put fingers or any objects inside rotating and moving parts, as this 

may cause damage or serious injury as your finger, hair, clothes, etc. may get 
caught.

•  Be sure that your operating frequency is clear before turning on or running 

your model, and never share the same frequency with somebody else at the 
same time. Ensure that others are aware of the operating frequency you are 
using and when you are using it.

•  Use a transmitter designed for ground use with RC cars. Make sure that no 

one else is using the same frequency as yours in your operating area. Using 
the same frequency at the same time, whether it is driving, flying or sailing, 
can cause loss of control of the RC model, resulting in a serious accident. 

•  Always turn on your transmitter before you turn on the receiver in the car. 

Always turn off the receiver before turning your transmitter off.

•  Keep the wheels of the model off the ground when checking the operation of 

the radio equipment.

•  Disconnect the battery pack before storing your model.
•  When learning to operate your model, go to an area that has no obstacles 

that can damage your model if your model suffers a collision.

•  Remove any sand, mud, dirt, grass or water before putting your model away.
•  If the model behaves strangely, immediately stop the model, check and clear 

the problem.

• To prevent any serious personal injury and/or damage to property, be 

responsible when operating all remote controlled models.

•  The model car is not intended for use on public places and roads or areas where 

its operation can conflict with or disrupt pedestrian or vehicular traffic.

•  Because the model car is controlled by radio, it is subject to radio interference 

from many sources that are beyond your control. Since radio interference can 
cause momentary loss of control, always allow a safety margin in all directions 
around the model in order to prevent collisions.

•  Do not use your model:
  - Near real cars, animals, or people that are unaware that an RC car is being  

  driven.

  - In places where children and people gather
  - In residential districts and parks
  - In limited indoor spaces
  - In wet conditions
  - In the street
  - In areas where loud noises can disturb others, such as hospitals and 

   residential areas.

  - At night or anytime your line of sight to the model may be obstructed or 

   impaired in any way.

To prevent any serious personal injury and/or damage to property, please be
responsible when operating all remote controlled models.

Failure to follow these instructions will be considered as abuse and/or neglect.

CUSTOMER SUPPORT 

XRAY Europe

K Vystavisku 6992
91101 Trenčín
Slovakia, EUROPE
Phone: 421-32-7401100
Fax: 421-32-7401109
Email: info@teamxray.com

We have made every effort to make these instructions as easy to understand as possible. 
However, if you have any difficulties, problems, or questions, please do not hesitate to 
contact the XRAY support team at info@teamxray.com. Also, please visit our Web site 
at www.teamxray.com to find the latest updates, set-up information, option parts, and 
many other goodies. We pride ourselves on taking excellent care of our customers.

You can join thousands of  XRAY fans and enthusiasts in our online community at:  

www.teamxray.com

XRAY USA

RCAmerica, 167 Turtle Creek Boulevard Suite C      
Dallas, Texas 75207
USA
Phone: (800) 519-7221 * (214) 744-2400
Fax: (214) 744-2401
Email: xray@rcamerica.com

Summary of Contents for T2008

































Reviews: