Xray T2R PRO Instruction Manual Download | Manualshive

Page: 12 / 32

background image

12

GEARING ADJUSTMENT

902304

SH M3x4

965050

C5

981210

P 2x10

940510

BB 5x10x4

SPUR GEARS

#305778 OFFSET SPUR GEAR 78T / 48P
#305781 OFFSET SPUR GEAR 81T / 48P
#305784 SPUR GEAR 84T / 48P
#305787 SPUR GEAR 87T / 48P
#305790 SPUR GEAR 90T / 48P
#305874 OFFSET SPUR GEAR 104T / 64P

#305876 OFFSET SPUR GEAR 106T / 64P
#305878 OFFSET SPUR GEAR 108T / 64P
#305880 OFFSET SPUR GEAR 110T / 64P
#305882 OFFSET SPUR GEAR 112T / 64P
#305884 OFFSET SPUR GEAR 114T / 64P
#305886 OFFSET SPUR GEAR 116T / 64P
#305888 OFFSET SPUR GEAR 118T / 64P

NOTE ORIENTATION

TO TIGHTEN FRONT BELT:

Rotate both front nylon hubs in arrow direction (B)

FRONT BELT TENSION ADJUSTMENT

AA

BB

TO LOOSEN REAR BELT:

Rotate both rear nylon hubs in arrow direction (A)

REAR BELT TENSION ADJUSTMENT

BB

AA

L=R

L=R

! IMPORTANT

Insert composite bushings perfectly
straight in bulkheads so the bearings spin
freely. If the bearings do not spin freely,
reinstall the composite bushings properly.

NOTE ORIENTATION
Only when using XRAY
OFFSET spur gears

AA

BB

AA

BB

TO LOOSEN FRONT BELT:

Rotate both front nylon hubs in arrow direction (A)

TO TIGHTEN REAR BELT:

Rotate both rear nylon hubs in arrow direction (B)

LOWER DIFF POSITION

UPPER DIFF POSITION

LOWER DIFF POSITION

UPPER DIFF POSITION

short belt

long belt

Lower diff position is recommended for large open asphalt
tracks with long sweepers.

Upper diff position is recommended for tight and technical carpet
tracks. The upper diff position improves handling in chicanes as
it provides more traction, increased steering and makes the car
easier to drive.

Lower diff position is recommended for large open asphalt tracks with
long sweepers.

Upper diff position is recommended for tight and technical carpet tracks.
The upper diff position improves handling in chicanes as it provides more
traction, increased steering and makes the car easier to drive.

OIL

BEARING OIL

(HUDY #106230)

OIL

BEARING OIL
(HUDY #106230)

INITIAL POSITION US FOAM-SPEC

PLACE TAB IN THIS NOTCH

INITIAL POSITION EU RUBBER-SPEC

PLACE TAB IN THIS NOTCH

INITIAL POSITION EU RUBBER-SPEC

PLACE TAB IN THIS NOTCH

INITIAL POSITION US FOAM-SPEC

PLACE TAB IN THIS NOTCH

3. CENTRAL TRANSMISSION

Y

CUTAWAY
VIEW

1.

2.

3.

«
...
10
11
12
13
14
...
»

Summary of Contents for T2R PRO

































Reviews:

No comments

Related manuals for T2R PRO

Brand: O'Donnell Pages: 36

Brand: ZERO-X Pages: 22

Brand: Lean Pages: 12

desertfighter 2

Brand: DF-models Pages: 60

Brand: SWorkz Pages: 44

Brand: Aosom Pages: 8

Brand: Jamara Pages: 20

Brand: X-RIDER Pages: 2

Brand: Lenoxx Pages: 9

Brand: Reely Pages: 94

Brand: Corally Pages: 10

Brand: Corally Pages: 14

Brand: GMP Pages: 12

Brand: Fisher-Price Pages: 4

John Deere GATOR HPX

Brand: Peg-Perego Pages: 44

Brand: Kyosho Pages: 37

REFLEX 14R HOONICORN 20178

Brand: Associated Electrics Pages: 18

Brontosaurus pro 1735

Brand: HSP Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands