13
FRONT DOwNSTOP
ADJuSTmENT
FRONT ANTI-ROLL BAR
REAR DOwNSTOP
ADJuSTmENT
REAR ANTI-ROLL BAR
901308
SB M3x8
901408
SB M4x8
901308
SB M3x8
901408
SB M4x8
REAR ARmS
#303163 HARD (H)
#303164 ExTRA-HARD (xH)
FRONT ARmS
#302163 HARD (H)
#302164 ExTRA-HARD (xH)
OPTIONAL REAR ARmS - 2-HOLE
#303165 HARD (H)
#303166 ExTRA-HARD (xH)
OPTIONAL FRONT ARmS - 2-HOLE
#302165 HARD (H)
#302166 ExTRA-HARD (xH)
903306
SFH M3x6
REAR LEFT ARM
REAR RIGhT ARM
RIGhT REAR ARM
FRONT LEFT ARM
FRONT RIGhT ARM
LEFT REAR ARM
REAR ARMS
3. FRONT & REAR SUSPENSION
3mm
2.0mm
3mm
4x8mm
3x8mm
L=R
FRONT RIGhT ARM
FRONT LEFT ARM
L=R
COMPLETED ASSEMBLY
3x8mm
4x8mm
COMPLETED ASSEMBLY
FRONT ARMS
L=R
2.2mm
L=R
Inner position
- more rear traction
Outer position
- more stable
Use the inner position for initial setting.
OPTIONAL 2-hOLE REAR ARMS
hARD ARM
- more rear traction (recommended for low-, medium-traction)
EXTRA hARD ARM
- more steering (recommended for high-traction)
hARD ARM
- more steering (recommended for low-, medium-traction)
EXTRA hARD ARM
- more stable, easier to drive (recommended for high-traction)
OPTIONAL 2-hOLE FRONT ARMS
inner position
- more steering
outer position
- more stable
Use the outer position for initial setting.
OPTIONAL FINE ROLL-CENTER ADJuSTMENT
Optional shims may be used for raising roll center. Use 3x7
shims with thicknesses between 0.1–0.5mm
OPTIONAL FINE ROLL-CENTER ADJuSTMENT
Optional shims may be used for raising roll center. Use 3x7
shims with thicknesses between 0.1–0.5mm
Summary of Contents for T3 2012
Page 1: ......