21
901302
SB M3x2.5
305394
P 2x9
902205
SH M2x5
940510
BB 5x10x4
980210
P 2x10
REAR TOE-IN
TRACK-WIDTH
OIL
BEARING OIL
(HUDY #106230)
THREAD LOCK
THREAD LOCK
2x9mm
GRAPHITE GREASE
(HUDY #106210)
GRAPHITE GREASE
(HUDY #106210)
TL
REAR TRANSMISSION
FRONT TRANSMISSION
L=R
T4 OPTIONAL PARTS
INCLUDED
UPRIGHTS
#303351 1° - R MEDIUM (2-HOLE)
#303352 0° - R/L MEDIUM (2-HOLE)
#303353 1° - R HARD (2-HOLE)
#303354 0° - R/L HARD (2-HOLE)
#303360 0° - R/L GRAPHITE (2-HOLE)
#303361 1° - L MEDIUM (2-HOLE)
#303362 0° - R/L MEDIUM (1-HOLE)
#303363 1° - L HARD (2-HOLE)
#303364 0° - R/L HARD (1-HOLE)
#303358 ALU 1° - R/L (4-HOLE)
#303359 ALU 2° - R/L (4-HOLE)
INCLUDED
INCLUDED
WHEEL HUBS
#305350-K ALU - OFFSET (0 mm)
#305351
ALU - OFFSET (-0.75 mm)
#305352
ALU - OFFSET (+0.75 mm)
#305353
ALU - OFFSET (+1.5 mm)
STEERING BLOCKS
#302252 MEDIUM
#302253 HARD
#302254 GRAPHITE
#302256 ALU
Set-screw against
the flat spot
ECS drive shafts are available in 51mm length in kit, or optional 50mm & 52mm lengths.
Longer drive shafts (52mm) make the car easier to drive because they give more traction and
better stability, mainly in chicanes. However, the car will understeer more than with shorter
(50mm) shafts which give a lot of steering and make the car more aggressive.
Both left & right shafts should ALWAYS be the same length.
52mm
shafts are recommended for
high-traction tracks.
51mm
shafts are recommended for
medium-traction tracks.
50mm
shafts are recommended for
low-traction tracks.
DRIVE SHAFTS
#305332 52MM - ECS
#305333 50MM - ECS
#305334 51MM - ECS
TL
#305242
DRIVE SHAFT REPLACEMENT CAP
3.5MM ORANGE - STRONG (4)
5. FRONT & REAR TRANSMISSION
2x
2x
2x
L=R
0° OUTBOARD TOE-IN UPRIGHTS
Left UPRIGHT = Right UPRIGHT
Summary of Contents for T4F
Page 1: ......
