background image

2

CUSTOMER SUPPORT 

XRAY Europe

K Výstavisku 6992

91101 Trenčín

Slovakia, EUROPE

Phone: +421-32-7401100

Fax: +421-32-7401109

Email: info@teamxray.com

We have made every effort to make these instructions as easy to understand as possible. 

However, if you have any difficulties, problems, or questions, please do not hesitate to 

contact the XRAY support team at info@teamxray.com. Also, please visit our Web site 

at www.teamxray.com to find the latest updates, set-up information, option parts, and 

many other goodies. We pride ourselves on taking excellent care of our customers.

You can join thousands of  XRAY fans and enthusiasts in our online community at:  

www.teamxray.com

XRAY USA

RC America, 2030 Century Center Blvd #15 

Irving, TX 75062 

USA

Phone: (214) 744-2400

Fax: (214) 744-2401

Email: xray@rcamerica.com

BEFORE YOU START

The XB8E is a high-competition, high-quality, 1/8 electric buggy intended for 

persons aged 16 years and older with previous experience building and operating 

RC model racing cars. This is not a toy; it is a precision racing model. This model 

racing car is not intended for use by beginners, inexperienced customers, or 

by children without direct supervision of a responsible, knowledgeable adult. 

If  you  do  not  fulfill  these  requirements,  please  return  the  kit  in  unused  and 

unassembled form back to the shop where you have purchased it.

Before building and operating your XB8E, YOU MUST read through all of the 

operating instructions and instruction manual and fully understand them to get

the maximum enjoyment and prevent unnecessary damage. Read carefully and 

fully understand the instructions before beginning assembly.

Make sure you review this entire manual, download and use set-up book from the 

web, and examine all details carefully. If for some reason you decide the XB8E is 

not what you wanted or expected, do not continue any further. Your hobby dealer 

cannot accept your XB8E kit for return or exchange after it has been partially or 

fully assembled.

Contents of the box may differ from pictures. In line with our policy of continuous 

product development, the exact specifications of the kit may vary without prior 

notice. 

SAFETY PRECAUTIONS

Contains:

LEAD (CAS 7439-92-1) ANTIMONY (CAS 7440-36-0)

WARNING: This product contains a chemical known to the state of California to 

cause cancer and birth defects or other reproductive harm.

CAUTION: CANCER HAZARD

Contains lead, a listed carcinogen. Lead is harmful if ingested. Wash thoroughly 

after  using.  DO  NOT  use  product  while  eating,  drinking  or  using  tobacco 

products. May cause chronic effects to gastrointestinal tract, CNS, kidneys, and 

blood. MAY CAUSE BIRTH DEFECTS.

When  building,  using  and/or  operating  this  model  always  wear  protective 

glasses and gloves.

Take  appropriate  safety  precautions  prior  to  operating  this  model.  You  are 

responsible  for  this  model‘s  assembly  and  safe  operation!  Please  read  the 

instruction  manual  before  building  and  operating  this  model  and  follow 

all  safety  precautions.  Always  keep  the  instruction  manual  at  hand  for  quick 

reference, even after completing the assembly. Use only genuine and original 

authentic XRAY parts for maximum performance. Using any third party parts on 

this model will void guaranty immediately.

Improper operation may cause personal and/or property damage. XRAY and 

its  distributors have no control over damage resulting from shipping, improper 

construction, or improper usage. XRAY assumes and accepts no responsibility for 

personal and/or property damages resulting from the use of improper building 

materials, equipment and operations. By purchasing any item produced by XRAY, 

the buyer expressly warrants that he/she is in compliance with all applicable 

federal, state and local laws and regulation regarding the purchase, ownership 

and use of the item. The buyer expressly agrees to indemnify and hold harmless 

XRAY for all claims resulting directly or indirectly from the purchase, ownership 

or use of the product. By the act of assembling or operating this product, the 

user  accepts  all  resulting  liability.  If  the  buyer  is  not  prepared  to  accept  this 

liability,  then  he/she  should  return  this  kit  in  new,  unassembled,  and  unused 

condition to the place of purchase.

 IMPORTANT NOTES – GENERAL

•  This  product  is  not  suitable  for  children  under  16  years  of  age  without  the 

direct supervision of a responsible and knowledgeable adult.

•  Carefully read all manufacturers warnings and cautions for any parts used in 

the construction and use of your model.

•  Assemble this kit only in places away from the reach of very small children.

•  First-time  builders  and  users  should  seek  advice  from  people  who  have 

building experience in order to assemble the model correctly and to allow the 

model to reach its performance potential.

•  Exercise care when using tools and sharp instruments.

•  Take care when building, as some parts may have sharp edges.

•  Keep small parts out of reach of small children. Children must not be allowed 

to put any parts in their mouth, or pull vinyl bag over their head.

•  Read and follow instructions supplied with paints and/or cement, if used (not 

included in kit).

•  Immediately  after  using  your  model,  do  NOT  touch  equipment  on  the 

model such as the motor and speed controller, because they generate high 

temperatures. You may seriously burn yourself seriously touching them.

•  Follow the operating instructions for the radio equipment at all times.

•  Do not put fingers or any objects inside rotating and moving parts, as this 

may cause damage or serious injury as your finger, hair, clothes, etc. may get 

caught.

•  Be sure that your operating frequency is clear before turning on or running 

your model, and never share the same frequency with somebody else at the 

same time. Ensure that others are aware of the operating frequency you are 

using and when you are using it.

•  Use a transmitter designed for ground use with RC cars. Make sure that no 

one else is using the same frequency as yours in your operating area. Using 

the same frequency at the same time, whether it is driving, flying or sailing, 

can cause loss of control of the RC model, resulting in a serious accident. 

•  Always  turn  on  your  transmitter  before  you  turn  on  the  receiver  in  the  car. 

Always turn off the receiver before turning your transmitter off.

•  Keep the wheels of the model off the ground when checking the operation of 

the radio equipment.

•  Disconnect the battery pack before storing your model.

•  When learning to operate your model, go to an area that has no obstacles 

that can damage your model if your model suffers a collision.

•  Remove any sand, mud, dirt, grass or water before putting your model away.

•  If the model behaves strangely, immediately stop the model, check and clear 

the problem.

•  To  prevent  any  serious  personal  injury  and/or  damage  to  property,  be 

responsible when operating all remote controlled models.

•  The model car is not intended for use on public places and roads or areas where 

its operation can conflict with or disrupt pedestrian or vehicular traffic.

•  Because the model car is controlled by radio, it is subject to radio interference 

from many sources that are beyond your control. Since radio interference can 

cause momentary loss of control, always allow a safety margin in all directions 

around the model in order to prevent collisions.

•  Do not use your model:

  - Near real cars, animals, or people that are unaware that an RC car is being   

  driven.

  - In places where children and people gather

  - In residential districts and parks

  - In limited indoor spaces

  - In wet conditions

  - In the street

  - In  areas  where  loud  noises  can  disturb  others,  such  as  hospitals  and  

   residential areas.

  - At night or anytime your line of sight to the model may be obstructed or  

   impaired in any way.

To prevent any serious personal injury and/or damage to property, please be

responsible when operating all remote controlled models.

Failure to follow these instructions will be considered as abuse and/or neglect.

Summary of Contents for XB8 2017













































Reviews: