41
903312
SFH M3x12
960030
N M3
12. FINAL ASSEMBLY
CA
To tighten the setscrew you can also use the
HUDY 17mm Wheel Nut Tool #107570
NOTE
ORIENTATION
DETAIL
WING SHIMS
#353565
COMPOSITE INCLUDED
#293561
ALU
OPTION
#293561-O ALU
OPTION
#353561
ALU
OPTION
WHEEL NUTS
#355261
OPEN
INCLUDED
#293560
COVERED
OPTION
#355265
COVERED
OPTION
XRAY STARBURST WHEELS
#359808 Pink
OPTION
#359809 Yellow OPTION
➍
Before cutting and making holes on the body, put the unpainted body on the chassis to confirm the
mounting position and location for holes and cutouts.
Before painting, wash the inside of the body with mild detergent, and then rinse and dry thoroughly.
Mask all windows.
Apply paint masks as appropriate.
Paint the body using paints formulated for polycarbonate bodies.
When the paint is dry, remove the masking.
Carefully cut out the body using appropriate scissors or cutting tools.
When you have finished cutting, peel off the external protective films.
➊
➋
➌
➎
➏
➐
➑
Body Reamer (HUDY #107600)
Ensure to make this rear body
mount hole oval so in the case of
chassis flex after a big jump the
body mount will not tear up the
hole.
To reinforce the body or to fix broken
body use #106280 HUDY BODY FIX
DETAIL
WINGS
#353511-K BLACK
INCLUDED
#353511
WHITE
OPTION
#353511-Y YELLOW
OPTION
#353512
LEXAN
OPTION
Summary of Contents for XB8 2017
Page 1: ......