33
➍
Before cutting and making holes on the BODY, put the unpainted body on the chassis to
confirm the mounting position and location for holes and cutouts. Before cutting and making
holes on the WING, put the unpainted wing on the wing holders to confirm the mounting
position and location for holes and cutouts.
Before painting, wash the inside of the body with mild detergent, and then rinse and dry
thoroughly.
Mask all windows.
Apply paint masks as appropriate.
➊
➋
➌
➎
➏
➐
➑
➒
Paint the body using paints formulated for polycarbonate bodies.
When the paint is dry, remove the masking.
Carefully cut out the body using appropriate scissors or cutting tools.
When you have finished cutting, peel off the external protective films.
Assembly rear wing.
BODY REAMER (HUD
Y #107600)
BOD
Y & WING
960240
N M4
L=R
4x
7. FINAL ASSEMBLY
902306
SH M3x6
308019
NUT M3
Tires & Wheels
(NOT INCLUDED)
DETAIL
308019
NUT M3
Summary of Contents for XT2
Page 1: ......
