10
11
2.4 Connection of Cable Modem (Office Version)
The CRUISER (XCM-2000) cable modem should be connected to the CATV
cable and user
’
s devices as described below.
•
Connect the coaxial cable provided by a ‘CATV’ service provider to the terminal
‘CABLE
’
on the back panel of the modem.
•
Connect either end of the RJ-45 Ethernet cable to the terminal
‘
ETHERNET
’
on the back panel of the cable modem and the other end to the trunk
terminal of your network device.
3. Use of CRUISER (XCM-2000) Cable Modem
3.1 Verification of Functions
•
•
POWER(LED)
This LED indicates that the power of the cable modem is on.
•
•
TEST(LED)
This LED goes on to indicate that the circuit of the modem is being checked when
the power is initially applied to the modem or the modem is reset.
•
•
LAN(LED)
This LED flashes to indicate that the cable modem and your PC normally transmit/receive
data while the modem normally operates.
•
•
U/S(LED)
This LED flashes to indicate that the cable modem normally transmits data.
•
•
D/S(LED)
This LED flashes to indicate that the cable modem normally receives data.
•
•
SYNC(LED)
This LED indicates that the cable modem and head-end equipment(CMTS)
are synchronized for data transmission/reception as the modem is initialized.
It should be always on while the modem normally operates.
Business Environment
The LEDs functions on the front panel of the CRUISER (XCM-2000)
cable modem are as described below.
