6
Installation
Place the balance and, using the adjustable feet and the bubble on the back, adjust the inclination.
The scale MUST be leveled.
Protect the balance from drafts, so do not install near windows or air conditioners;
Protect the balance from vibrations;
Working temperature: 10°C – 40°C;
Working Humidity: 40% - 85%.;
Installation and removal of the scale must be done with the machine switched off;
Do not use the scale upside down;
After switch On, wait at least 30 minutes warming up before the first weighing;
For assistance, contact your dealer or an authorized service center.
Keyboard
On / Off
Hold for 3 seconds to start Calibration procedure
Unit selection
Print data (RS 232 printer / PC)
Tare
Zero
Counter function, set unit in %,
‰
, PCS, B/G
Stability indicator
measure
Zero
Unit
Capacity
