ENGLISH - 10
4-1. Upgrade via the app
4. Software Upgrade
Download and install the Sat Connect app from the App store
Turn on the antenna power (Turn on the receiver power and PI BOX)
Connected the application with the antenna
Select FW UPGRADE from the menu to update the antenna
UPGRADE takes about 5 minutes
a.
b.
c.
d.
e.
3-3. Quick reference
When you physically move unit, the unit must be returned to HOME
position to prevent damage.
WARNING
SNIPE4 will be automatically folded back to HOME position if vehicle
moves faster than 30km/h when the unit is powered.
SNIPE4 supports the ignition function. If the ignition cable is connected,
the antenna automatically moves to the home position when the vehicle
starts.
NOTE
1.
2.
3.
4.
Turn on the remote control and select the unit that matches the MAC Address of your
antenna.
Use the left and right arrow buttons to select the satellite and press the SET button.
Wait for the message 'FOUND SAT' to appear on the remote control screen.
When the satellite search is complete, watch the broadcast.
Summary of Contents for SNIPE4
Page 20: ......
